New Products

Product data

ØD=32 mm; Ød=24 mm; H=3.5 mm; L=4 mm  

Material: PU80

Application range (the following limit values cannot appear at the same time):

Pressure: ≤ 16 bar
Speed: ≤ 1 m/s
Temperature: -20°C ~ +80°C
Media: аir, oil-lubricated and dry air, oil-free air (initial lubrication during assembly)

Manufacturer:

Zhongxingshun Sealing Products Factory

Product data

ØD=32 mm; Ød=24 mm; H=3.25 mm; L=3.5 mm 

Material: NBR80

Application range (the following limit values cannot appear at the same time):

Pressure: ≤ 16 bar
Speed: ≤ 1 m/s
Temperature: -20°C ~ +80°C
Media: аir, oil-lubricated and dry air, oil-free air (initial lubrication during assembly)

Manufacturer:

Zhongxingshun Sealing Products Factory

Product data

The hydraulic seal Y has a symmetrical design and is suitable for both piston and rod.

Ød=110 mm; ØD=140 mm; H=15 mm; Ød1=111 mm; ØD1=139 mm; L=18 mm  

Material: NBR80

Application range (the following limit values cannot appear at the same time):

Pressure: ≤ 200 bar
Speed: ≤ 0.5 m/s 
Temperature: -30°C ~ +80°C
Media: mineral-based hydraulic oils and emulsions; not suitable for environmetally-friendly oils (bio oils)

Manufacturer:

Zhongxingshun Sealing Products Factory

Product data

The hydraulic seal UPI has a symmetrical design and is suitable for both piston and rod.

Ød=80 mm; ØD=95 mm; h=9  mm

Material: PU90

Application range (the following limit values cannot appear at the same time):

Pressure: ≤ 320 bar; when the pressure is higher than 150 bar, it is recommended to use a back-up ring
Speed: ≤ 0.5 m/s for piston, ≤ 1.0 m/s for rod
Temperature: -20°C ~ +80°C
Media: mineral-based hydraulic oils and emulsions; not suitable for environmetally-friendly oils (bio oils)

Manufacturer:

Zhongxingshun Sealing Products Factory

Product data

The hydraulic seal UPI has a symmetrical design and is suitable for both piston and rod.

Ød=80 mm; ØD=92 mm; h=9  mm

Material: PU90

Application range (the following limit values cannot appear at the same time):

Pressure: ≤ 320 bar; when the pressure is higher than 150 bar, it is recommended to use a back-up ring
Speed: ≤ 0.5 m/s for piston, ≤ 1.0 m/s for rod
Temperature: -20°C ~ +80°C
Media: mineral-based hydraulic oils and emulsions; not suitable for environmetally-friendly oils (bio oils)

Manufacturer:

Zhongxingshun Sealing Products Factory

Product data

The hydraulic seal UPI has a symmetrical design and is suitable for both piston and rod.

Ød=80 mm; ØD=90 mm; h=10  mm

Material: PU90

Application range (the following limit values cannot appear at the same time):

Pressure: ≤ 320 bar; when the pressure is higher than 150 bar, it is recommended to use a back-up ring
Speed: ≤ 0.5 m/s for piston, ≤ 1.0 m/s for rod
Temperature: -20°C ~ +80°C
Media: mineral-based hydraulic oils and emulsions; not suitable for environmetally-friendly oils (bio oils)

Manufacturer:

Zhongxingshun Sealing Products Factory

Product data

The hydraulic seal UPI has a symmetrical design and is suitable for both piston and rod.

Ød=80 mm; ØD=90 mm; h=9  mm

Material: PU90

Application range (the following limit values cannot appear at the same time):

Pressure: ≤ 320 bar; when the pressure is higher than 150 bar, it is recommended to use a back-up ring
Speed: ≤ 0.5 m/s for piston, ≤ 1.0 m/s for rod
Temperature: -20°C ~ +80°C
Media: mineral-based hydraulic oils and emulsions; not suitable for environmetally-friendly oils (bio oils)

Manufacturer:

Zhongxingshun Sealing Products Factory

Hydraulic piston/rod seal with symmetrical design. 

ID: 53.0 mm

OD: 63.0 mm

Width: 8.0 mm

Material: PU92 

Adaptable temperature: -20 ~ 100 C

Maximum working pressure: 350 bar (35Mpa)

Manufacturer:  SO GIANT OIL SEAL INDUSTRIAL  CO., LTD

Hydraulic piston/rod seal with symmetrical design. 

ID: 50.0 mm

OD: 63.0 mm

Width: 9.0 mm

Material: PU92 

Adaptable temperature: -20 ~ 100 C

Maximum working pressure: 350 bar (35Mpa)

Manufacturer:  SO GIANT OIL SEAL INDUSTRIAL  CO., LTD

Silicone radiator/cooler hose as 90° bend
with 3 layers and a side length of 152mm ,
made from blue silicone and reinforced with high tensile textile fabrics
for temperatures from -50 to +180°C
reduced from 40mm on 35mm inner diameter

Weight: 0.206 kg.

Manufacturer:

MCC Millennium Coupling Germany GmbH

​For delivery options to your country, please do not hesitate to contact us!