New Products

Hydraulic piston/rod seal with symmetrical design. 

ID: 14.0 mm

OD: 20.0 mm

Width: 5.0 mm

Material: PU92 

Adaptable temperature: -20 ~ 100 C

Maximum working pressure: 350 bar (35Mpa)

Manufacturer:  SO GIANT OIL SEAL INDUSTRIAL  CO., LTD

Hydraulic piston/rod seal with symmetrical design. 

ID: 12.0 mm

OD: 18.0 mm

Width: 4.0 mm

Material: PU92 

Adaptable temperature: -20 ~ 100 C

Maximum working pressure: 350 bar (35Mpa)

Manufacturer:  SO GIANT OIL SEAL INDUSTRIAL  CO., LTD

Hydraulic piston/rod seal with symmetrical design. 

ID: 10.0 mm

OD: 18.0 mm

Width: 8.0 mm

Material: PU92 

Adaptable temperature: -20 ~ 100 C

Maximum working pressure: 350 bar (35Mpa)

Manufacturer:  SO GIANT OIL SEAL INDUSTRIAL  CO., LTD

Product data

Ød=6 mm; ØD=14 mm; h=6 mm 

Material: PU93

Application range (the following limit values cannot appear at the same time):

Pressure: ≤ 320 bar; when the pressure is higher than 200 bar, it is recommended to use a back-up ring
Speed: ≤ 0.8 m/s
Temperature: -30°C ~ +80°C
Media: mineral-based hydraulic oils and emulsions; not suitable for environmetally-friendly oils (bio oils)

Manufacturer:

Zhongxingshun Sealing Products Factory

Product data

ØD=32 mm ; Ød=8 mm ; H=15 mm 

Material: NBR+metal

Application range (the following limit values cannot appear at the same time):

Pressure: ≤ 12 bar
Speed: ≤ 1.0 m/s
Temperature: -30°C ~ +80°C
Media: Oil-lubricated air, dry air and oil-free air (initial lubrication required during installation).

Manufacturer:

Zhongxingshun Sealing Products Factory

Material: nitrile rubber NBR.

Hardness: Shore 70±5 

The color of nitrile rubber is generally black, but might vary occasionally, without this impacting the sealing properties of the X-ring.

O-ring dimensions:  Internal diameter d1= 66.27 mm   

                                 Cross section d2 = 3.53 mm

For delivery options to your country, please do not hesitate to contact us!

Material: Ethilene propilene dien rubber (EPDM).

Hardness: Shore 70±5 

The color of EPDM rubber is generally black, but might vary occasionally, without this impacting the sealing properties of the O-ring.

O-ring dimensions:  Internal diameter d1= 18.0 mm   

                                 Cross section d2 = 2.65 mm

Useful link: https://www.cog.de/produkte/rund-um-den-o-ring/o-ring-einbaumasse/einbaumasse

Material: nitrile rubber NBR.

Hardness: Shore 70±5 

The color of nitrile rubber is generally black, but might vary occasionally, without this impacting the sealing properties of the O-ring.

O-ring dimensions:  Internal diameter d1= 50.0 mm   

                                 Cross section d2 = 1.0 mm

Useful link: https://www.cog.de/produkte/rund-um-den-o-ring/o-ring-einbaumasse/einbaumasse

Product data

Ød=145 mm; ØD=150 mm; h=9.5 mm  

Material: Fabric-reinforced phenolic resin

Application range (the following limit values cannot appear at the same time):

Speed: ≤ 0.5 m/s
Temperature: -50°C ~ +120°C
Media: mineral-based hydraulic oils and emulsions

Manufacturer:

Zhongxingshun Sealing Products Factory

Product data

d=70 mm; D=75 mm; H=9.7 mm
Material: POM (Polyoxymethylene)
Speed: ≤ 1.0 m/s
Temperature: -40°C ~ 110°C
Static load capacity: 40 N/mm² 
Dynamic load capacity: 20 N/mm²
Working medium: mineral hydraulic oils and emulsions

Manufacturer:

GUARNITEC S.r.l.

100% Made in Italy

For delivery options to your country, please do not hesitate to contact us!

Product photos are for illustrative purposes and may differ from the actual appearance of the item. This does not affect the characteristics of the product.