New Products

Product data

ØD=32 mm; Ød=24 mm; H=3.5 mm; L=4 mm 

Material: NBR80

Application range (the following limit values cannot appear at the same time):

Pressure: ≤ 16 bar
Speed: ≤ 1 m/s
Temperature: -20°C ~ +80°C
Media: аir, oil-lubricated and dry air, oil-free air (initial lubrication during assembly)

Manufacturer:

Zhongxingshun Sealing Products Factory

Product data

The hydraulic seal Y has a symmetrical design and is suitable for both piston and rod.

Ød=18 mm; ØD=30 mm; H=6 mm; Ød1=18.6 mm; ØD1=29.4 mm; L=8 mm  

Material: NBR80

Application range (the following limit values cannot appear at the same time):

Pressure: ≤ 200 bar
Speed: ≤ 0.5 m/s 
Temperature: -30°C ~ +80°C
Media: mineral-based hydraulic oils and emulsions; not suitable for environmetally-friendly oils (bio oils)

Manufacturer:

Zhongxingshun Sealing Products Factory

Product data

The hydraulic seal USH has a symmetrical design and is suitable for both piston and rod.

Ød=32 mm; ØD=42 mm; h=6 mm; ØD1=41 mm; HA =7 mm; HB = 10 mm; C =2.5 mm

Material: NBR90

Application range (the following limit values cannot appear at the same time):

Pressure: ≤ 210 bar; when the pressure is higher than 150 bar, it is recommended to use a back-up ring
Speed: ≤ 0.5 m/s
Temperature: -30°C ~ +100°C
Media: mineral-based hydraulic oils and emulsions; not suitable for environmetally-friendly oils (bio oils)

Manufacturer:

Zhongxingshun Sealing Products Factory

Product data

The hydraulic seal UPI has a symmetrical design and is suitable for both piston and rod.

Ød=36 mm; ØD=44 mm; h=5.7  mm

Material: PU90

Application range (the following limit values cannot appear at the same time):

Pressure: ≤ 320 bar; when the pressure is higher than 150 bar, it is recommended to use a back-up ring
Speed: ≤ 0.5 m/s for piston, ≤ 1.0 m/s for rod
Temperature: -20°C ~ +80°C
Media: mineral-based hydraulic oils and emulsions; not suitable for environmetally-friendly oils (bio oils)

Manufacturer:

Zhongxingshun Sealing Products Factory

Product data

The hydraulic seal UPH has a symmetrical design and is suitable for both piston and rod.

Ød=35 mm; ØD=50 mm; h=10 mm; ØD1=49 mm; HA=11 mm; HB=14 mm; r=4 mm

Material: NBR90

Application range (the following limit values cannot appear at the same time):

Pressure: ≤ 320 bar; when the pressure is higher than 150 bar, it is recommended to use a back-up ring
Speed: ≤ 0.5 m/s
Temperature: -30°C ~ +100°C
Media: mineral hydraulic oils, water-glycol hydraulic oils, emulsions

Manufacturer:

Zhongxingshun Sealing Products Factory

Hydraulic piston/rod seal with symmetrical design. 

ID: 32.0 mm

OD: 45.0 mm

Width: 8 mm

Material: PU92 

Adaptable temperature: -20 ~ 100 C

Maximum working pressure: 350 bar (35Mpa)

Manufacturer:  SO GIANT OIL SEAL INDUSTRIAL  CO., LTD

Oil seal type SB (B),  without dust lip and with spring. 

Material: nitrile rubber (NBR).

OE References:

Suitable for:

For reference only. We cannot guarantee 100% compatibility.Manufacturer:  

SO GIANT OIL SEAL INDUSTRIAL  CO., LTD

For delivery options to your country, please do not hesitate to contact us!

Oil seal type A (SC),  without  dust lip and with spring. 

Material: nitrile rubber (NBR).

Helix:

OE references:

Suitable for:

Manufacturer:  SO GIANT OIL SEAL INDUSTRIAL  CO., LTD

Oil seal type BS  (TB),  with dust lip and with spring. 

Material: fluoride rubber ( FPM)

Helix:

OE references:

Suitable for:

Manufacturer:  SO GIANT OIL SEAL INDUSTRIAL  CO., LTD

Oil seal type A (SC),  without dust lip and with spring. 

Material: fluoride rubber ( FPM)

Helix: 

The nitrile rubber may vary in color from the one shown in the picture, without this affecting the sealing properties of the oil seal.

Manufacturer: 

SO GIANT OIL SEAL INDUSTRIAL  CO., LTD