O-rings
An O-ring seal is a means of preventing unwanted leakage or loss of fluid or gas (i. e. media generally). The O-ring is the most popular form of seal as it is simple to install and needs little installation space. Given correct grooving and material choice, the seal can be used for a very long time within the rubber's temperature limits both as a fixed and as a moving part.
O-ring 5.0x1.0 Silicone 70
Material: Silicone rubber (MVQ).
Hardness: Shore 70±5
The color of Silicone rubber is generally red, but might vary occasionally, without this impacting the sealing properties of the O-ring.
O-ring dimensions: Internal diameter d1= 5.0 mm
Cross section d2 = 1.0 mm
Useful link: https://www.cog.de/produkte/rund-um-den-o-ring/o-ring-einbaumasse/einbaumasse
In stock 660 pcs.
O-ring 212.0x6.0 Viton 70
Material: fluororubber Viton (FPM).
Hardness: Shore 70±5
The color of fluororubber is generally graphite black, but might vary occasionally, without this impacting the sealing properties of the O-ring.
O-ring dimensions: Internal diameter d1= 212.0 mm
Cross section d2 = 6.0 mm
Useful link: https://www.cog.de/produkte/rund-um-den-o-ring/o-ring-einbaumasse/einbaumasse
In stock 10 pcs.
O-ring 170.0x6.0 Viton 70
Material: fluororubber Viton (FPM).
Hardness: Shore 70±5
The color of fluororubber is generally graphite black, but might vary occasionally, without this impacting the sealing properties of the O-ring.
O-ring dimensions: Internal diameter d1= 170.0 mm
Cross section d2 = 6.0 mm
Useful link: https://www.cog.de/produkte/rund-um-den-o-ring/o-ring-einbaumasse/einbaumasse
In stock 6 pcs.
O-ring 145.0х6.0 Viton 75
Material: fluororubber Viton (FPM).
Hardness: Shore 75±5
The color of fluororubber is generally graphite black, but might vary occasionally, without this impacting the sealing properties of the O-ring.
O-ring dimensions: Internal diameter d1= 145.0 mm
Cross section d2 = 6.0 mm
Useful link: https://www.cog.de/produkte/rund-um-den-o-ring/o-ring-einbaumasse/einbaumasse
In stock 3 pcs.
O-ring 140.0х6.0 Viton 75
Material: fluororubber Viton (FPM).
Hardness: Shore 75±5
The color of fluororubber is generally graphite black, but might vary occasionally, without this impacting the sealing properties of the O-ring.
O-ring dimensions: Internal diameter d1= 140.0 mm
Cross section d2 = 6.0 mm
Useful link: https://www.cog.de/produkte/rund-um-den-o-ring/o-ring-einbaumasse/einbaumasse
In stock 1 pcs.
O-ring 113.0x6.0 Viton 70
Material: fluororubber Viton (FPM).
Hardness: Shore 70±5
The color of fluororubber is generally graphite black, but might vary occasionally, without this impacting the sealing properties of the O-ring.
O-ring dimensions: Internal diameter d1= 113.0 mm
Cross section d2 = 6.0 mm
Useful link: https://www.cog.de/produkte/rund-um-den-o-ring/o-ring-einbaumasse/einbaumasse
In stock 6 pcs.
O-ring 85.0x6.0 Viton 75
Material: fluororubber Viton (FPM).
Hardness: Shore 75±5
The color of fluororubber is generally graphite black, but might vary occasionally, without this impacting the sealing properties of the O-ring.
O-ring dimensions: Internal diameter d1= 85.0 mm
Cross section d2 = 6.0 mm
Useful link: https://www.cog.de/produkte/rund-um-den-o-ring/o-ring-einbaumasse/einbaumasse
In stock 50 pcs.
O-ring 25.0x6.0 Viton 70
Material: fluororubber Viton (FPM).
Hardness: Shore 70±5
The color of fluororubber is generally graphite black, but might vary occasionally, without this impacting the sealing properties of the O-ring.
O-ring dimensions: Internal diameter d1= 25.0 mm
Cross section d2 = 6.0 mm
Useful link: https://www.cog.de/produkte/rund-um-den-o-ring/o-ring-einbaumasse/einbaumasse
In stock 20 pcs.
O-ring 79.2х5.7 Viton 70
Material: fluororubber Viton (FPM).
Hardness: Shore 70±5
The color of fluororubber is generally graphite black, but might vary occasionally, without this impacting the sealing properties of the O-ring.
O-ring dimensions: Internal diameter d1= 79.2 mm
Cross section d2 = 5.7 mm
Useful link: https://www.cog.de/produkte/rund-um-den-o-ring/o-ring-einbaumasse/einbaumasse
In stock 4 pcs.
O-ring 305.0x5.0 Viton 70
Material: fluororubber Viton (FPM).
Hardness: Shore 70±5
The color of fluororubber is generally graphite black, but might vary occasionally, without this impacting the sealing properties of the O-ring.
O-ring dimensions: Internal diameter d1= 305.0 mm
Cross section d2 = 5.0 mm
Useful link: https://www.cog.de/produkte/rund-um-den-o-ring/o-ring-einbaumasse/einbaumasse
In stock 10 pcs.
