O-rings
An O-ring seal is a means of preventing unwanted leakage or loss of fluid or gas (i. e. media generally). The O-ring is the most popular form of seal as it is simple to install and needs little installation space. Given correct grooving and material choice, the seal can be used for a very long time within the rubber's temperature limits both as a fixed and as a moving part.
O-ring 21.0х2.5 Viton 80
Material: fluororubber Viton (FPM).
Hardness: Shore 80±5
The color of fluororubber is generally graphite black, but might vary occasionally, without this impacting the sealing properties of the O-ring.
O-ring dimensions: Internal diameter d1= 21.0 mm
Cross section d2 = 2.5 mm
Useful link: https://www.cog.de/produkte/rund-um-den-o-ring/o-ring-einbaumasse/einbaumasse
In stock 65 pcs.
O-ring 20.0х2.5 Viton 80
Material: fluororubber Viton (FPM).
Hardness: Shore 80±5
The color of fluororubber is generally graphite black, but might vary occasionally, without this impacting the sealing properties of the O-ring.
O-ring dimensions: Internal diameter d1= 20.0 mm
Cross section d2 = 2.5 mm
Useful link: https://www.cog.de/produkte/rund-um-den-o-ring/o-ring-einbaumasse/einbaumasse
In stock 270 pcs.
O-ring 19.5х2.5 Viton 75
Material: fluororubber Viton (FPM).
Hardness: Shore 75±5
The color of fluororubber is generally graphite black, but might vary occasionally, without this impacting the sealing properties of the O-ring.
O-ring dimensions: Internal diameter d1= 19.5 mm
Cross section d2 = 2.5 mm
Useful link: https://www.cog.de/produkte/rund-um-den-o-ring/o-ring-einbaumasse/einbaumasse
In stock 131 pcs.
O-ring 19.0х2.5 Viton 80
Material: fluororubber Viton (FPM).
Hardness: Shore 80±5
The color of fluororubber is generally graphite black, but might vary occasionally, without this impacting the sealing properties of the O-ring.
O-ring dimensions: Internal diameter d1= 19.0 mm
Cross section d2 = 2.5 mm
Useful link: https://www.cog.de/produkte/rund-um-den-o-ring/o-ring-einbaumasse/einbaumasse
In stock 280 pcs.
O-ring 18.0х2.5 Viton 80
Material: fluororubber Viton (FPM).
Hardness: Shore 80±5
The color of fluororubber is generally graphite black, but might vary occasionally, without this impacting the sealing properties of the O-ring.
O-ring dimensions: Internal diameter d1= 18.0 mm
Cross section d2 = 2.5 mm
Useful link: https://www.cog.de/produkte/rund-um-den-o-ring/o-ring-einbaumasse/einbaumasse
In stock 15 pcs.
O-ring 17.0х2.5 Viton 80
Material: fluororubber Viton (FPM).
Hardness: Shore 80±5
The color of fluororubber is generally graphite black, but might vary occasionally, without this impacting the sealing properties of the O-ring.
O-ring dimensions: Internal diameter d1= 17.0 mm
Cross section d2 = 2.5 mm
Useful link: https://www.cog.de/produkte/rund-um-den-o-ring/o-ring-einbaumasse/einbaumasse
In stock 220 pcs.
O-ring 16.0х2.5 Viton 75
Material: fluororubber Viton (FPM).
Hardness: Shore 75±5
The color of fluororubber is generally graphite black, but might vary occasionally, without this impacting the sealing properties of the O-ring.
O-ring dimensions: Internal diameter d1= 16.0 mm
Cross section d2 = 2.5 mm
Useful link: https://www.cog.de/produkte/rund-um-den-o-ring/o-ring-einbaumasse/einbaumasse
In stock 46 pcs.
O-ring 15.0х2.5 Viton 70
Material: fluororubber Viton (FPM).
Hardness: Shore 70±5
The color of fluororubber is generally graphite black, but might vary occasionally, without this impacting the sealing properties of the O-ring.
O-ring dimensions: Internal diameter d1= 15.0 mm
Cross section d2 = 2.5 mm
Useful link: https://www.cog.de/produkte/rund-um-den-o-ring/o-ring-einbaumasse/einbaumasse
In stock 118 pcs.
O-ring 13.0х2.5 Viton 80
Material: fluororubber Viton (FPM).
Hardness: Shore 80±5
The color of fluororubber is generally graphite black, but might vary occasionally, without this impacting the sealing properties of the O-ring.
O-ring dimensions: Internal diameter d1= 13.0 mm
Cross section d2 = 2.5 mm
Useful link: https://www.cog.de/produkte/rund-um-den-o-ring/o-ring-einbaumasse/einbaumasse
In stock 460 pcs.
O-ring 10.0х2.5 Viton 80
Material: fluororubber Viton (FPM).
Hardness: Shore 80±5
The color of fluororubber is generally graphite black, but might vary occasionally, without this impacting the sealing properties of the O-ring.
O-ring dimensions: Internal diameter d1= 10.0 mm
Cross section d2 = 2.5 mm
Useful link: https://www.cog.de/produkte/rund-um-den-o-ring/o-ring-einbaumasse/einbaumasse
In stock 337 pcs.
