O-ring 212.0x6.0 Viton 70
In stock 10 pcs.
- Code:49060021202
- Weight:0.003 Kgs
Material: fluororubber Viton (FPM).
Hardness: Shore 70±5
The color of fluororubber is generally graphite black, but might vary occasionally, without this impacting the sealing properties of the O-ring.
O-ring dimensions: Internal diameter d1= 212.0 mm
Cross section d2 = 6.0 mm
Useful link: https://www.cog.de/produkte/rund-um-den-o-ring/o-ring-einbaumasse/einbaumasse
Estimated Shipping
to Targovishte starts at €5.18outside Targovishte starts at €5.28
to Targovishte starts at €2.73outside Targovishte starts at €2.73
Fluororubber properties:
Excellent resistance to mineral oils, aliphatic and aromatic hydrocarbons, as well as hydrocarbons containing chlorine, concentrated and dilluted acids, weak alkalis. Its excellent heat resistance (up to +200°C), as well as cold resistance (-30°C), depending on the type of seal, along with its good mechanical properties and remarkable aging resistance, place fluororubber well above the traditional synthetic rubbers. It is especially suitable for high peripheral velocity applications.
Advantages:
- excellent heat resistance within a wide temperature range: from -30°С to 200 °С
- superior resistance to oil and fuels as compared to other rubber types
- the only highly elastic rubber which is resistant to aromatic and chlorinated hydrocarbons
- negligible gas permeability
- excellent weather and ozone resistance
- excellent acid resistance to both concentrated and dilluted acids
- good resistance to weak alkalis
- low swelling in water
Limitations:
- limited flexibility in cold conditions
- limited tensile and tear strength
- limited wear resistance
- high compression set in hot water
- poor resistance to polar solvents
